How To Install A Graphics Card? Not As Hard As You Think

One of the simplest things to refresh a PC is to upgrade your graphics card.  Updating your GPU is similar to improving your RAM in that it entails removing your existing graphics card and replacing it with a new one.

It’s simple, but we understand that first-time users may be nervous about installing the major part in their project. Therefore, we will show you how to install a graphics card properly in this article.

To install a new graphics card, follow the three parts:

  • Picking a graphics card (remember to consider between the performance and your budget)
  • Install the card
  • Give it a try after finishing

Let’s get started!

What Is A Graphics Card?

  How To Install A Graphics Card

A graphics card is a circuit board with a CPU, RAM, and other parts that appear like a miniature computer motherboard version. A graphics card is frequently referred to as a graphics processing unit (GPU). However, the GPU is simply one of the graphics card’s components.

Step-By-Step: How To Install A Graphics Card?

You can rely on the instructions of this video to better understand the method to install a graphics card to your PC.

Part 1: Picking A Graphics Card

Step 1: Open The Computer Case

Open the computer’s casing to remove the old graphics card, identify the power supply, and put in a new one. Most current cases feature thumbscrews on the rear that remove the side panel simply. However, older cases require a Phillips-head screwdriver to unscrew the screws.

Before dismantling the side panels, you need to make sure the power cables and all peripherals are disconnected. Next, disconnect the cover on the motherboard’s side.

You’ll notice a panel on one side with USB, Internet, and display connections, among other things, on the back of the computer.

The motherboard I/O panel is in front of you, which shows you which side is on. You can reach the motherboard by laying your device on this side and removing the other panel.

Step 2: Ensure The Power Supply

Strong graphics cards necessitate a power supply that can keep up with their demands. Unfortunately, if you use an older power supply or have additional components consuming power, your power source may not be up to the task.

If that’s the case, consider updating both your power source and graphics card. Several websites may assist you in calculating power needs by evaluating all of the devices you have installed or plan to add.

Use your preferred search engine to look for a “power calculator.” PCI-E connectors are also required for your power source. It is not generally an issue if your power source is modern, but older ones may lack the necessary connections.

The maximum wattage of the power supply is on a sticker attached to the power source. You may have to take the power supply out to discover it.

Step 3: Ensure The Motherboard

Motherboard Of A Computer

Nowadays, almost all graphics cards are PCI-E, so make sure you have one of these slots. They are usually found in the array of PCI slots nearest to the processor.

If your motherboard doesn’t have any slots, you’ll probably have to buy a new one to update the graphics card. You may find the diagram in the manuals for your motherboard, remember to install latest motherboard drivers.

It will assist you in determining the location of the PCI-E slots. Next, reload your operating system after setting up a new motherboard. Notice that most laptops don’t let you update the graphics card.

Step 4: Fit The Card

PCI slots

Many current graphics cards are enormous, and many of them will occupy two PCI slots on your computer. They may also be rather tall and lengthy, so notice that you have sufficient horizontal and vertical space.

Make a note of the clearance available using a tape measure. Almost all cards go along with their measurements stated in the package insert, enabling you to double-check that they will fit before buying.

Step 5: Consider Your Budget

There Are Many Types On The Market

Graphics cards may be rather costly, and they are exorbitantly priced. However, after a certain point, the extra expense of higher-end cards will no longer benefit the typical user.

Examine the apps you’ll be using your card with and choose one that provides the most power and dependability for your money. The more costly cards are usually aimed at card overclockers and those who wish to employ dual- or quad-card setups.

Before selecting a card, read as many ratings as possible. There are several tools available online to help you discover the most outstanding performance for your money.

Check the system needs for the game titles you want to play. Check out which graphics card has the suggestion for the most incredible performance in your favorite games, as well as future game requirements.

Step 6: Look Through The Display Capability

HDMI, DisplayPort, DVI, VGA, or any combo of these may be supported by your new GPU. Check what type of connection your monitor utilizes and buy your card properly.

Screen Resolution

You should connect through DisplayPort or HDMI for the highest possible quality. If you wish to use several displays, be sure your graphics card has enough connections to handle them.

You do not want one monitor connected to HDMI and another to VGA since the VGA monitor will be limited and will appear bad next to the display of HDMI.

Part 2: Installing A Graphics Card

Step 1: Disconnect Old Driver

Driver incompatibility is one of the most common sources of errors and difficulties. Therefore, it would be best to remove the graphics drivers that Windows presently uses to show graphics before adding your new card.

The most straightforward approach to remove your drivers is to access Device Manager and delete them from there. Look for Device Manager in the Menu bar or press Win+X and launch it (Win 8 only).

Open the Display Adapters area once you’re in Device Manager. Next, uninstall your old display adapter by right-clicking it. Next, uninstall the driver from your system by following the on-screen instructions.

The quality of your display will most likely reset to week, with big icons and fuzzy text. After removing the graphics drivers, turn off your computer.

Step 2: Ground Yourself

Make sure that you are correctly grounded while working with delicate computer parts. Electromagnetic discharge can cause your components to be damaged or destroyed, leaving them unusable.

It would be best to use an anti-static strap that is fastened to exposed metals in your case. When going inside the computer, keep in mind the opened computer is not sitting on the carpet, and you are on linoleum or tile. Before you start working on the interior, remember to disconnect the computer from the wall.

Step 3: Identify The Old Card

Identify Your Old Card

Your previous graphics card is probably plugged into an AGP or PCI-E slot on your motherboard. Most graphics cards are pretty big, and your card will most probably be the largest in your system.

They are frequently equipped with heatsinks and fans. There’s no need to remove the card if the computer previously used integrated graphics.

Step 4: Remove The Old Card

Remove the card you currently have before installing the latest one if you’re exchanging graphics cards. Then, remove the card’s connection to the chassis by unscrewing the screw.

Most modern cars have a lever at the backside of the PCI slot that must be released before removing the card. Pull it straight up to avoid damaging the PCI slot while removing it. Before disassembling the card, remember to connect any displays to it that are disconnected.

Step 5: Remove Dust

Clean Your Old Card

Remove any dust that has accumulated. Now the old card is out, and it is an excellent opportunity to wipe out some of the gathered debris.

Clear from the crevices surrounding the PCI slot using compressed air. Dust can accumulate and cause your equipment to overheat, so keeping your laptop clean can help it last longer.

Step 6: Insert New Graphics Card In Place

Insert Your New Card

Please take the card from its antistatic bag with care, being careful not to touch any one of the connections or circuitry. Then, apply consistent pressure to the top of the card until it is firmly placed in the vacant PCI-e slot.

You’ll hear the PCI-E slot clip snap into position if you have one. If your card is two panels wide, removing the next panel is essential. Before seating the card, ensure there are no wires or other equipment in the way. Depend on your budget, you can choose from low profile graphics card to high-end graphics card, graphics card under $200 is good choice if you are not playing game like Call of Duty with high setting.

Step 7: Secure The Card

To attach the graphics card to the frame, use box screws. If your graphics card is double panels wide, use two screws, one for each, to fasten it. Before tightening the screws, double-check that the card is inserted correctly.

Step 8: Connect To Power Source

Power connector ports are built-in to the top and rear of most contemporary cards. One or more PCI-E connections, generally 6-pin cables, must be connected from the power source.

These cards do not function correctly if the power source is not connected. Many cards come with converters that allow you to convert your current connections to fit into the card.

Step 9: Close Up Computer

Close Up Computer

You may close the case once you have checked that the card is correctly placed, secured, and linked to the power source. Remember to connect your display to the new card.

If you previously used onboard video, the display was most likely connected to the motherboard. Your display must be linked to your new card to make use of it.

Connect your monitor to the card through DisplayPort or HDMI for the best results. If your screen or graphics card doesn’t support DisplayPort or HDMI, go for DVI, followed by VGA.

Part 3: Testing

Step 1: Power On Your Computer

Your computer system will identify the new card and adapt your display to the highest reliability and color depth possible. Accept the modifications and reboot the computer.

If the monitor isn’t showing any image at all, let’s troubleshoot your setup. Double-check that the card is correctly inserted and linked.

An image that is uneven or distorted might cause a problem with the graphics card. Before approaching the manufacturer, make sure your card is correctly inserted.

Step 2: Insert Driver Disc

An Example Of A Driver Disc

If your card arrived with a driver disc, you may insert it to start the driver installation. If your card didn’t arrive with a CD, and you want to ensure the most recent version of the drivers, you may get them straight from AMD or Nvidia.

Step 3: Install The New Driver

Although you may be prompted to install any extra graphics card software solutions, the driver installation process is mainly automated. This add-on program is optional.

However, it can assist you in keeping your drivers current. During this process, your display will flicker and reset. Because drivers are nearly always out of date when they’re purchased, you’ll almost certainly be prompted to upgrade them once you set them up.

Step 4: Start A Game

Play A Game To Test The Performance

Turn up all settings to the maximum and give it a try. If it runs without a hitch, you’re set to go. Always attempt to keep the quality at the resolution of your display while adjusting the resolution.

Start decreasing settings if the game is laggy or otherwise functioning poorly. Don’t worry if the card cannot handle the Ultra settings; games occasionally come out that do not function with any graphics card.

The graphics card isn’t the only factor that affects a game’s performance. The game’s performance is influenced by your processor, hard drive speed, and RAM.


Graphics card among the parts in a computer, is the one that ages the most quickly. Each year, new graphics cards are launched, each with greater power and functions than the last.

Hopefully, after reading this article, you may understand how to install a graphics card correctly, but it does entail opening your desktop and switching components, which might be intimidating if you have never worked on your system before.



Leave a Comment